Tonight I took off the cover plate to the Factory Installed (Furrion Camera) Mount. Then plugged in the new Furrion FOS48TAPK-BL Observation Camera. Our 2016 LM 365 Key West is plugged into shore power at the moment. The camera power light came on immediately. Does anyone know if this circuit is switched? I had read in other posts that most people get power from the tail marker light circuit. I don't think I want the camera "On" when I not actually going down the road or backing up. But before I change any wiring, I thought I'd ask the question.
As for the install, I got to say it was the easiest thing I've ever done. 4 screws out, take off the flat plate, plug in the camera to the power in the coach, 4 screws back in. Go to truck (which is about 12 feet away), plug in the 12v power source, and bingo the camera works right away with great picture. Soon will be the road test to see how it performs while moving.
As for the install, I got to say it was the easiest thing I've ever done. 4 screws out, take off the flat plate, plug in the camera to the power in the coach, 4 screws back in. Go to truck (which is about 12 feet away), plug in the 12v power source, and bingo the camera works right away with great picture. Soon will be the road test to see how it performs while moving.